Colleges that avoid long card office lines collect student ID photos before students arrive. Students submit a photo from their own phone or laptop weeks ahead of orientation, software reviews it against the school's photo standards, and the card office prints cards in advance so students pick up a finished ID at check-in.
If you've ever watched an orientation-week line wrap around the building, you know why this matters. Getting to pre-printed cards comes down to a handful of decisions most card offices make once and fine-tune every year: where the photo step lives in the student's checklist, who handles the photos that need a second look, and how cards get from the printer to the right student on move-in day. We'll walk through each one, from the first planning meeting to the students who still show up without a photo.
Quick note before we dive in. If your main goal is better photos on the first try, start with our guide to reducing student ID photo rejections. If you need to know the photo actually matches the student, our guide to verifying student ID photos before campus arrival covers that. This one is all about the logistics of getting photos in hand before anyone sets foot on campus.
Why In-Person Photo Capture Breaks Down at Orientation
Picture (no pun intended) one camera station, one staff member, and a three-to-four-minute cycle per student to pose, capture, print, and hand over a card. That's about fifteen students an hour. Multiply that by a few thousand new students across a handful of orientation sessions, and the line could span the Great Wall of China.
And the wait is only part of it. Students spending some of their very first day standing in a line instead of experiencing your campus is a huge vibe killer. Staff putting in long days for the entire orientation week lowers morale. And any student without a card can't get into their residence hall, dining halls, or the library on their own, which isn't exactly the welcome anyone had in mind.
What Is a Pre-Arrival Photo Collection Workflow?
A pre-arrival photo collection workflow moves the photo step out of the card office and ahead of the student's arrival. You'll also hear it called remote photo capture or online photo submission. Instead of sitting for a photo on campus, students submit one from their own phone or laptop, wherever they are, days or weeks before orientation.
That changes the card office's job in a big way. You go from photographer to distributor. Your team sets the photo standards, handles only the photos that need a human decision, and prints cards ahead of time so they're waiting at check-in.
How to Collect Student ID Photos Before Students Arrive
1. Map Your Current Process
Before you change anything, get honest about how it works today. Write down how many students you photograph per orientation session, how long the line gets, and how many photos you retake (and why). Those numbers become your baseline, and they're what you'll bring to other departments when you ask for their help. If you've never tracked why photos get rejected, our rejections guide walks through how to start.
2. Choose Online Photo Submission Software
A basic file upload form won’t cut it. You’ll want guided capture, automated checks that flag problems the second a photo is submitted, automatic cropping and background removal, and a way to send approved photos straight into your card production system. Our breakdown of what to look for in online student ID photo submission software goes deeper on each one. Our higher education overview shows how RemotePhoto works.
3. Publish Your Photo Requirements Early
Don't make students hunt for your photo requirements. Put them everywhere students are already looking: admission confirmations, housing emails, orientation materials, and the submission page itself. A couple of example photos, one that passes and one that doesn't, will do more than a paragraph of written rules. You can already plan on getting some pretty outrageous submissions, but unclear requirements will definitely raise your likelihood of seeing something truly diabolical.
4. Tie Photo Submission to a Step Students Already Have to Complete
If you only make one change from this guide, make it this one. Optional photo uploads get skipped. Required steps get done, especially when they unlock the next item on the checklist.
The University of Minnesota Twin Cities is a great example. In a CampusIDNews interview, Stephen Courchane, Director of the U Card Office, described partnering with the orientation office so students had to upload a photo before they could sign up for an orientation date. Before that change, roughly 50 to 60 percent of students uploaded a photo ahead of time. Afterward, upwards of 80 percent did, and close to 95 percent of students received their U Card at or before the start of orientation during the first couple of weeks that summer. The office also built an integration so students who already had a photo on file skipped the step entirely.
And orientation registration isn't the only lever you can pull. Housing confirmation, meal plan selection, and the new student checklist in your portal all work the same way. Think about the step students are most eager to finish, and put the photo right in front of it.
5. Let Automation Handle the Clear-Cut Photos
Collecting photos early doesn't help much if someone still has to review every single one by hand. Set your online photo submission software to approve photos that clearly meet your standards, deny the ones that clearly don't with an explanation the student can act on immediately, and route everything in between to a person on your team. Decide before the season starts who owns that review queue and how quickly they'll respond. With clear guidelines and the right software, that queue should stay small. Our rejections guide covers how to set those thresholds and run edge-case review.
6. Pre-Print Cards and Plan Distribution
Once photos are approved, print cards in batches that match how students will actually arrive: by orientation session, residence hall, or last name. You're aiming for one simple handoff where the student shows a government-issued ID, picks up a finished card, and goes on with their day.
The University of Guelph is a nice example of what this can look like. Residence students who submit their photo by the summer deadline receive their campus card at their residence desk when they check in, according to the university's move-in information. Off-campus students can pick up their card at a distribution station in the University Centre courtyard over the move-in weekend, or anytime after classes begin.
Pre-arrival collection gets even better if your campus offers mobile credentials. Students usually need an approved photo before they can add their ID to their phone's wallet, so when photos are collected ahead of time, students can download their mobile credential before they ever arrive on campus. They can tap into their residence hall, the dining hall, and the library from day one, without a stop at the card office or a card to pick up at all.
Collecting Photos From Online, Transfer, International, and Graduate Students
Not every student comes through the main orientation weekend, and those are often the ones who slip through the cracks. Online students may never visit campus. Transfer students and spring admits often enroll after the main orientation push. International students can't exactly stop by the card office from another country, and graduate students frequently skip undergraduate orientation altogether.
The good news is that with online submission, the same process works for all of them. Decide ahead of time how online students will get their card, whether you mail it, hold it for pickup, or issue a mobile credential if your campus offers one, and say so in the invitation.
Do You Still Need an On-Campus Photo Station?
Yes, but it can be a lot smaller. Some students will always show up without a photo on file, and replacement cards and walk-in requests keep coming all year. When most students submit ahead of time, the station that used to run all day during orientation turns into a short line for one staff member.
It helps to think of in-person capture and online photo submission as two different ways of working. In-person capture depends on how quickly your office can get through whoever shows up. Submitting ahead moves that work off campus and ahead of arrival, so instead of a faster line, you mostly don't have one. Many campuses run both, with online submission as the default and the camera station as the backup.
How to Get Other Departments on Board
Here's the thing: the card office can't pull this off alone. Orientation, housing, IT, and student affairs each own a piece of the arrival process, and the photo requirement usually has to live in one of their systems. So start with what they already care about. Shorter check-in lines help housing. Fewer temporary cards help campus security. A smoother first day helps orientation and student affairs.
Bring those baseline numbers with you. A long photo line holds up housing check-in, meal plan activation, and building access, which makes it everyone's problem, not just yours. And don't expect to nail it the first year. Minnesota went through several iterations before landing on the orientation requirement that worked.
A 12-Week Implementation Timeline
Here's what this can look like on the calendar. Twelve weeks gives you room to breathe, and if orientation is coming up sooner than that, you can compress the steps.
12 Weeks Before Orientation: Choose and Configure Your Software
Pick your online photo submission software, set your photo standards and approval rules, and brand the student-facing pages so they look like they're coming from your campus. If you go with RemotePhoto, implementation typically takes about a week, but leave some room for IT and security review.
10 Weeks Before: Coordinate With Other Departments
Get orientation, housing, and whoever owns the required step you're attaching the photo to in the same room. Agree on where the photo step sits in the student checklist, who sends which messages, and how cards will be handed out at check-in.
6 Weeks Before: Open Submissions and Start Communications
Open your submission window and send the first invitation with your requirements, example photos, and a direct link. Then schedule at least two reminders, because one email is never enough. Opening four to six weeks ahead gives students time to submit, fix anything that gets flagged, and get approved before you print.
With RemotePhoto, students see what needs fixing the moment they submit and can retake their photo on the spot, so your office isn’t stuck in a five-email back-and-forth death spiral.
2 Weeks Before: Print and Stage Cards
Export approved photos, print cards in batches by orientation session or residence hall, and get them staged for distribution. Then send one last reminder, with a firm deadline, to anyone who still hasn't submitted. RemotePhoto has detailed dashboards that can tell you exactly who hasn't submitted yet. It's like having an Apple AirTag on all your missing ID photos.
Orientation: Hand Out Cards and Catch Stragglers
Hand out pre-printed cards at check-in and keep a small photo station open for the stragglers. If 80 percent or more of your students submitted ahead of time, that station should be pretty quiet. Your staff will thank you.
What to Measure After You Launch
Once orientation wraps, five numbers will tell you whether the workflow is working. Pre-arrival submission rate is the share of incoming students with an approved photo before they arrive, and 80 percent is a reasonable target given what schools like Minnesota have reached. Card office wait time during orientation is the number students and staff actually feel most. Staff hours spent on photo processing, compared with your baseline, shows the time you got back. First-submission approval rate tells you whether your requirements and feedback are clear, and review turnaround time tells you whether edge cases are moving or piling up.
Common Mistakes When Moving Photo Collection Online
Most of these show up in year one, and the good news is they're all easy to fix.
Making Submission Optional
If the photo is just a suggestion, plenty of students will skip it, and those are the students standing in your line on move-in day. Tie it to a required step and watch those pre-arrival submission rates skyrocket.
Sending One Email and Hoping
Students need to hear about the photo requirement several times, and in several places, before they actually act. You've gotta be annoying about it. Put it in the admission confirmation, the housing assignment, and orientation registration, and send at least two standalone reminders.
Printing Without a Distribution Plan
Pre-printed cards only save time if they reach the right student quickly. Sort them the way students will arrive, and make sure everyone working check-in knows where the cards are.
Forgetting Late Admits
Transfer students, spring admits, and anyone admitted late in the summer are easy to miss. Send invitations on a rolling basis as students enroll, so no one gets left out.
How RemotePhoto Fits Into Your Campus Card Workflow
RemotePhoto is built for exactly this: collecting compliant ID photos before students arrive. Students get an invitation, take their photo on their own phone or laptop with guided capture, and get real-time feedback from RemotePhoto Butler if something needs fixing, so they can retake it on the spot. Cropping, rotation, and background removal happen automatically. Photos that meet your standards are approved without anyone touching them, and your team only sees the ones the AI can't make a decision on.
Old Dominion University grew its photo submission rate by 75% in the first semester after moving to a pre-arrival workflow with RemotePhoto. Margaret Pollard-Brown, Monarch Card Center Director, no longer had to pay overtime for staff who used to stay until 8 p.m. on orientation days. Read the ODU story.
RemotePhoto is system-agnostic, so it works with virtually any card production system, access control platform, or HR system. Approved photos move into your existing workflow through the RemotePhoto API or the open-source RemotePhoto Downloader, which sends photos wherever your card production system needs them. Campuses can buy RemotePhoto directly or through OEM partners like Atrium, TouchNet, ITC, or Illumia (formerly Transact+CBORD). If you already work with one of our partners, you can add RemotePhoto through them.
RemotePhoto has processed more than 12 million ID photos, more than 550 organizations use it, and most teams are up and running in about a week.
Want to see how it would work on your campus? Request a demo and we'll walk you through a pre-arrival workflow built around your orientation schedule.
FAQs About Student ID Photo Collection
How do colleges collect student ID photos before students arrive?
Most colleges send incoming students a link to submit a photo from their own phone or laptop weeks before orientation. Software checks each photo against the school's standards, staff review the few that need a human decision, and the card office prints cards in advance so students pick them up at check-in.
How far in advance should students submit their ID photos?
Open submissions four to six weeks before orientation. That gives students time to submit, fix anything that gets flagged, and get approved. It also gives your office time to print and sort cards before students arrive.
How do you get more students to submit their photo before orientation?
Make the photo a required step instead of a suggestion. The University of Minnesota Twin Cities raised its pre-arrival upload rate from roughly 50 to 60 percent to upwards of 80 percent by requiring a photo before students could register for an orientation date. Housing confirmation and meal plan selection work as levers too.
What happens if a student doesn't submit a photo before arriving?
Keep a small photo station open during orientation for those students. When most of your incoming class submits ahead of time, that station handles a short line instead of the whole class.
How do online students get a student ID card?
Online students submit their photo remotely like everyone else. Each campus then decides how to deliver the card, whether by mail, by holding it for pickup, or through a mobile credential if the campus offers one. Tell students which option applies in their photo invitation email.
Can online photo submission work with strict photo standards?
Yes. RemotePhoto lets you set approval rules that match your institution's requirements, and RemotePhoto Butler checks every submission against them and tells students exactly what to fix. All the communication happens within the application, in real time, so your office never has to draft another denial email. Only the photos that fall between a clear approval and a clear denial go to your team for review.
How do you prevent students from submitting someone else's photo?
Students can upload a supporting ID, like a driver's license or passport, in the same session as their photo. RemotePhoto uses facial comparison to check the headshot against the portrait on the ID and flags mismatches for your team before a card prints. It doesn't confirm the ID itself is authentic, so it works best alongside your institution's own identity verification steps. Our guide to verifying student ID photos before campus arrival walks through the full process.
Does collecting ID photos online require a large IT investment?
No. RemotePhoto is cloud-based, needs no on-campus hardware, and typically takes about a week to implement. We maintain it. And it's system-agnostic, so approved photos move into virtually any card production system through the RemotePhoto API or the RemotePhoto Downloader.

